Availability: | |
---|---|
Quantity: | |
RB
ORR
ORR-RB-M5500
Applications of Magnetostrictive Position Sensor
·Plastics machinery
·Fluid Power & Linear Actuators
·Hydraulics and Pneumatics machinery
·Processing machinery
Introduction of Magnetostrictive Position Sensor
Magnetostrictive position sensor with magnetostrictive technology, bases on principle of pulse variation due to position variation.
Magnetostrictive position sensors are non-contact linear position sensors, magnet ring doesn't contact with thewaveguid, sensing position by magnetic pulse, thus free from wear, no downtimes, a long service life, and high resolution up to 0.001mm.
Special features of Magnetostrictive Position Sensor
·High resolution up to 0.001mm.
·Stroke length up to 5500mm(Customizable)
·Non-wear and non-contacting measurement method
·Interface support Analog, SSI, CAN
Applications of Magnetostrictive Position Sensor
·Plastics machinery
·Fluid Power & Linear Actuators
·Hydraulics and Pneumatics machinery
·Processing machinery
Introduction of Magnetostrictive Position Sensor
Magnetostrictive position sensor with magnetostrictive technology, bases on principle of pulse variation due to position variation.
Magnetostrictive position sensors are non-contact linear position sensors, magnet ring doesn't contact with thewaveguid, sensing position by magnetic pulse, thus free from wear, no downtimes, a long service life, and high resolution up to 0.001mm.
Special features of Magnetostrictive Position Sensor
·High resolution up to 0.001mm.
·Stroke length up to 5500mm(Customizable)
·Non-wear and non-contacting measurement method
·Interface support Analog, SSI, CAN
Basic Specifications of Position Sensor
Specifications | Technical data |
Stroke length | 50~5500 mm (Customizable) |
Resolution | 16-bit D/A or 0.0015% of full scale (min. 1μm) |
Nonlinearity | < ±0.01 %F.S. |
Repeatability | < ±0.001 %F.S. |
Update time | 1KHz (range ≤ 1m), 500Hz (1m < range ≤ 2m), 250Hz (2m < range ≤ 3m), customizable |
Output signal | Analog, SSI, CAN |
Operating voltage | 24Vdc±20% |
Current consumption | <100mA (varying with range) |
Insulation strength | 500V |
Operating temperature | -40~+85℃ |
Vibration proof | 20g(10... 2000 Hz) |
Shock proof | 100g(6ms) |
Magnet speed | Any |
Material | Electronic bin: SUS304, Measuring rod: SUS304 |
Electrical connection | Cable outlet or connector |
IP protection | IP67 |
Basic Specifications of Position Sensor
Specifications | Technical data |
Stroke length | 50~5500 mm (Customizable) |
Resolution | 16-bit D/A or 0.0015% of full scale (min. 1μm) |
Nonlinearity | < ±0.01 %F.S. |
Repeatability | < ±0.001 %F.S. |
Update time | 1KHz (range ≤ 1m), 500Hz (1m < range ≤ 2m), 250Hz (2m < range ≤ 3m), customizable |
Output signal | Analog, SSI, CAN |
Operating voltage | 24Vdc±20% |
Current consumption | <100mA (varying with range) |
Insulation strength | 500V |
Operating temperature | -40~+85℃ |
Vibration proof | 20g(10... 2000 Hz) |
Shock proof | 100g(6ms) |
Magnet speed | Any |
Material | Electronic bin: SUS304, Measuring rod: SUS304 |
Electrical connection | Cable outlet or connector |
IP protection | IP67 |
Note: The forward output of the sensor means that when the magnet ring moves away from the electronic bin, the output value
increases and decreases when the magnet ring moves in the reverse direction.
Examples of selection:RB-M3600-S1-PH60-A01C-S4
Indication: The product is a compact sealed RB structure, with an effective stroke of 3600 mm, a bottom sealed M18×1.5, six-pin
plug, output of 4-20 mA, Min. output value of no magnet ring state, single magnet ring, non-usable area of 40mm at the head and
60mm at the end.
Note: The forward output of the sensor means that when the magnet ring moves away from the electronic bin, the output value
increases and decreases when the magnet ring moves in the reverse direction.
Examples of selection:RB-M3600-S1-PH60-A01C-S4
Indication: The product is a compact sealed RB structure, with an effective stroke of 3600 mm, a bottom sealed M18×1.5, six-pin
plug, output of 4-20 mA, Min. output value of no magnet ring state, single magnet ring, non-usable area of 40mm at the head and
60mm at the end.