Physical separation from hazardous media: Fluid-isolation barrier can be implemented to prevent corrosive media coming into direct contact with the sensor diaphragm; Heat is dissipated from the media in the tube.

Pressure sensors for corrosive liquids and gasesPressure sensors for use with corrosive media often feature housings made from stainless steel or plastics such as PVDF, PVC or PPS. The sensor elements themselves are typically ceramic.However, ORR Sensor use a stainless steel diaphragm backed by silicon oil that transfers pressure to the sensing element.

How to connect pressure sensor, pressure transducer or pressure transmitter to industrial instrumentation or PLC? ①Pressure sensor 4-wire Millivolt-output ②Pressure transducers 3-wire Voltage-output ③Pressure transmitters 2 wire 4-20mA current-output

How to select the appropriate sensor When we provide sensing solutions, it is very important to choose the right products. There are so many kinds of sensors. Once the selection is not good, it will bring a lot of issues to the application.

In hydraulic industry, hydraulic oil pressure measurement are critical for monitoring and controlling hydraulic systems, ensuring efficiency, safety, and predictive maintenance.

ORR pressure transmitters applied in the chiller and air conditioning of Carrier and LG which are two most famous air conditioning manufacturer in the world.

Sensors have been widely used in the construction machinery industry. The sensor device can output various physical and chemical signals as electrical signals, such as gravity, temperature, sound, distance, etc., so that the staff can directly control or adjust the data detected by the sensor.

How to select a suitable pressure sensor or transmitter sometimes is a difficult decision. Here are some tips for you. There are six common types of pressure sensor in our market, it's hard to say which one is the best, however, we can select the most suitable one upon our application and practical condition, we can use below table to analyze their different performances and features.

Injection Molding Machine Hydraulic Oil Circuit System Monitoring PT03 pressure transmitter, acquire pressure value of the hydraulic oil circuit system of the injection machines in real time: injector control, ejector control, and mold closure, so as to provide reliable closed-loop control feedback signals for the stable operation of the hydraulic system. Injection Force Monitoring The injection molding needs to reach the specified force value, FC50 force sensors could send the signal when the molten liquid reach the limited force value to realize high accuracy injection control.

1. Application and measurement type. Common type of pressure measurement include: Absolute, gauge, differential, vacuum, bidirectional, and sealed gage. 2. Pressure range. kPa, Bar,Psi, Mpa 3. Process media. Water, Oil, Gas etc 4. Temperature range and installation environment. -30~80℃ etc. 5. Accuracy. ±0.25%F.S. 6. Output. 4~20mA, mV, 0.5~4.5Vdc etc ​