Profile Housing Magnetostrictive Position Sensors
You are here: Home » Products » Magnetostrictive Position Sensor » HP Magnetostrictive Position Sensor » Profile Housing Magnetostrictive Position Sensors


Share to:
sharethis sharing button

Profile Housing Magnetostrictive Position Sensors

High resolution of up to 0.005mm
Stroke length of 50~2500mm(Customizable)
Non-wear and non-contacting measurement method
Linear measurement, absolute position output
Profile housing, widely used in presses, plastics molding and processing, factory automation
  • HP

  • ORR

  • ORR-HP-M2500

Applications of Magnetostrictive Position Sensor

·Plastics machinery 

·Fluid Power & Linear Actuators

·Hydraulics and Pneumatics machinery

·Processing machinery

Introduction of Magnetostrictive Position Sensor

Magnetostrictive position sensor with magnetostrictive technology, bases on principle of pulse variation due to position variation. 

Magnetostrictive position sensors are non-contact linear position sensors, magnet ring doesn't contact with thewaveguid, sensing position by magnetic pulse, thus free from wear, no downtimes, a long service life, and high resolution up to 0.005mm.

Special features of Magnetostrictive Position Sensor

·High resolution up to 0.005mm.

·Stroke length up to 2500mm(Customizable)

·Non-wear and non-contacting measurement method

Basic Specifications of Position Sensor

SpecificationsTechnical data

Stroke length

50~2500 mm (Customizable)
Resolution16-bit D/A or 0.0015% of full scale (min. 5μm)
Nonlinearity< ±0.02 %F.S.
Repeatability< ±0.005 %F.S.
Update time1ms(range≤1m); 2ms(1m<range≤2m); 3ms(2m<range≤3m)
Fluctuation< ±0.01  %F.S.
Output signal4~20mA, 0 ~ 10Vdc or 0~5Vdc
Operating voltage24Vdc±20%
Current consumption<80mA
Electric shock500V(Between electrical ground and machine ground)
Operating temperature-40~+85℃
Vibration proof
20g(10... 2000 Hz)
Shock proof
Magnet speedAny

Aluminum profile

Electrical connectionM16- 6 Pin / 8 Pin connection, Flyling lead
IP protectionIP65

M16- 6 Pin / 8 Pin connection 

ORR-HP-Position Sensor

Flying Lead 

ORR-HP-Position Sensor

ORR-HP-Position Sensor order guide

Example of order code: HP-M0300-C2-PH60-A01B-B1 

① Sensor type: HP Structure, fixed clamp mouting

② Stroke lenth: 300mm

③ Magnet type: Slider magnet

④ Electrical connection: M16, 6 PIN connection

⑤ Output signal: 4~20mA

⑥ No magnet state: output value greater than 20mA

⑦ Dead zone: Head 72.5mm+ End 72.5mm.



Product Inquire
ORR Sensor Co., Ltd. 
Total Sensor Solution




  Add : 6# Building, No. 285 Rongxing Road, Shanghai, 201613
   Phone : +86-18917497750
   E-mail :
   Skype : tanxi21
Copyright   2023 ORR Sensor Co., Ltd.